REMOVAL OF URETHANES - cured and uncured
Dynaloy has developed a line of safe, effective products specifically for the urethane industry. If your company moulds urethane products or parts, or is involved in the spraying of urethane foams, then these products are for you. They quickly remove cured material from application and mixing equipment. Most of these products are non-flammable, non-chlorinated, non-regulated and contain very low VOC's. These products are described in more detail below. For even more detail click on the product name.
Product Name
Solvent Base Flashpoint
Speed
Selectivity Print as a PDF Dynasolve CU-6 Cyclic amide 210oF Excellent Good Dynasolve CU-5 Cyclic amide 198oF Excellent Good UR-Away Propylene Glycol Ether 105oF Excellent Fair UR-Away NF (Replaced by Dynasolve 2000) Alkanolamine >200oF Excellent Fair PUR-Strip 100 DMSO >165oF Good Excellent PUR-Strip 200 DMSO >165oF Good Good PUR-Strip 300 DMSO >165oF Excellent Fair Dynaflush Cyclic amide 191oF N/A N/A UR-Away FL Special Solvent >300oF N/A N/A Poly-Flush Propylene Glycol >180oF N/A N/A PUR-Flush 100 Propylene Glycol >150oF N/A N/A PUR-Flush 200 DMSO >150oF N/A N/A PUR-Flush 300 DMSO >150oF N/A N/A Dynasolve 750 & 711 Propylene Glycol Ether >105oF Excellent Fair Dynasolve 2000 Alkanolamine >222oF Excellent Fair Dynasolve CU-9 Cyclic amide 210oF Excellent Good Cyclic amide 200oF (cc) Excellent Good For additional information on Dynaloy, Inc., products and services, just click on any of the links below, or call, fax or e-mail us. We look forward to working with you.
Dynaloy, Inc. takes every precaution in the manufacture of its products. The information in this sheet is based upon our own research and is considered accurate. However, no warranty is expressed or implied regarding accuracy and results to be obtained, since operating conditions in your plant are beyond our control.
Additional information can be found in Quick Reference Table for products suitable for flushing and soaking, mould cleaning and other applications.