Dynasolve Mold Cleaner 1000

NON-FLAMMABLE SOLVENT FOR REMOVING URETHANE RESIDUE FROM MOULDS

 

Dynasolve Mold Cleaner 1000 is a proprietary mould cleaning solvent characterized by a high viscosity to minimize splashing and evaporation. It was developed to remove cured polyurethane residue from moulds. The product is non-chlorinated, nonflammable, non-carcinogenic, and non-ozone depleting. Dynasolve Mold Cleaner 1000 is an excellent replacement for solvents such as methylene chloride and 1,1,1-trichloroethane in cleaning polyurethane mould build-up. Dynasolve Mold Cleaner 1000 is much safer and friendlier to the environment than these solvents. It can be used for extended periods as it tolerates high resin loading and has a very low evaporation rate.

 

APPLICATIONS:
1. For the polyurethane moulding industry, Dynasolve Mold Cleaner 1000 removes built-up of polyurethane residue from metal moulds by a dissolving action.
2. Dynasolve Mold Cleaner 1000 is safe to use on all metallic moulds.
3. For the rapid prototyping industry, Dynasolve Mold Cleaner 1000 is effective at removing most urethane residue from silicone moulds without damaging the mould.

 

TYPICAL PROPERTIES:
 

Color	Light Amber
Appearance	Viscous Liquid
Specific gravity	1.02
Boiling point	400oF
Flash point	194oF (cc)

DIRECTIONS FOR USE:
1. For use at room temperature: Dynasolve Mold Cleaner 1000 works rapidly at room temperature, cleaning moulds in minutes when using a gentle brushing action. Apply solvent to mould. Let stand for 1-5 minutes. Use gentle brushing action to remove residue. Wipe off or rinse out mould with water.
2. For use in elevated temperature: Dynasolve Mold Cleaner 1000 will clean moulds without brushing if immersed in a heated bath (140-150°F) of solvent.
 

CAUTION:
Please refer to MSDS for safety procedures in handling this product. As with any solvent, use of impervious gloves and safety glasses are required. 

AVAILABILITY AND TERMS:
Dynasolve Mould Cleaner 1000 is packaged in US quarts, 9-pint containers, 5-gallon pails, and 55-gallon drums.  It is a stock item and can be shipped by UPS (ground or air), truck or air freight. Terms are Net 30 days, FOB shipping point. Prices are subject to change without notice.

For additional information on our products and services, just click on any links or categories, or call, fax or E-mail us. We look forward to working with you.

Dynaloy, Inc. takes every precaution in the manufacture of its products. The information in this sheet is based upon our own research and is considered accurate. However, no warranty is expressed or implied regarding accuracy and results to be obtained, since operating conditions in your plant are beyond our control.